Affiliation:
1. Shanghai Maritime University
Abstract
At first, this paper discusses the unfavorable environment where a tunnel is constructed by shield machine. As a novel solution, GPR is employed to detect some undesirable obstacles or geological conditions to ensure a smooth tunnel construction. After a brief introduction about the implementation of the detecting system, this paper raises the problem about the signal transferring between the antenna and the GPR body, and between the GPR and the control computer, which are far away arranged each other in two different cabins with relative rotating motion and under a very difficult connection condition. Two signal transferring methods, by cable or by wireless, and their advantage and limitations are discussed. This paper then proposes some key mechanical and electrical modifications on the central swivel joint or some other assemblies of the shield machine to meet the requirement for the signal transferring of the GPR. As this GPR system is supposed to be long-term online detecting equipment, this paper provides a dedicatedly designed power supply to replace the original DC power of the GPR.
Publisher
Trans Tech Publications, Ltd.
Reference4 articles.
1. Li Xiang-hong, Fu De-ming. Experimental study on excavation behavior using model EPB shield with a diameter of 1. 8m[J]. Chinese Journal of Geotechnical Engineering, 2006, 28(9): 1101 –1105.
2. Singh K K K, Chouhan R K S. Exploration of underground strata condition for a traffic bypass tunnel using ground penetrating radar system a case study [J]. Geotechnical and Geological Engineering, 2002, 20(1): 81–87.
3. Zhou Qi-cai, Li Bing-jie, He Hong-yu, et al. Mechanical modification for FCB shield machine frontal detection base on GPR application [J]. Mechatronics, 2008, 14(5): 40 –42.
4. Kuorilehto M, Hannikainen M, Niemi M, et al. Implementation of wireless LAN access point with quality of service support[C] The 28th Annual Conference of the IEEE Industrial Electronics Society. NJ: Piscataway, 2002: 2333 –2338.