Effect of Clearance on Thermodynamic Characteristics of Woven Liner Spherical Plain Bearing-Reference-Cited by-同舟云学术

Effect of Clearance on Thermodynamic Characteristics of Woven Liner Spherical Plain Bearing

Published:2014-10 Issue: Volume:668-669 Page:164-167
ISSN:1662-7482
Container-title:Applied Mechanics and Materials
language:
Short-container-title:AMM

Author:

Qiu Ming¹,Duan Chuang Chuang¹,Chen Long¹,Li Ying Chun¹,Hu Ren Song¹

Affiliation:

1. Henan University of Science and Technology

Abstract

The mechanical property of woven liner spherical plain bearing in different clearance has been analyzed using the finite element software. It indicated that when the positive clearance of woven liner spherical plain bearing is 100um, the maximum stress of its inner ring is the lowest. The position of the maximum stress is in the middle of the inner ring. That makes the bearing has a bigger carry capacity. Based on above analysis, the thermal properties between the friction pair of woven liner spherical plain bearing which clearance is 100um is also analyzed. The node temperature variation trend of inner ring and liner along with the analysis process is obtained.

Publisher

Trans Tech Publications, Ltd.

Link

https://www.scientific.net/AMM.668-669.164.pdf

Reference8 articles.

1. Dinghan Xiang, Qinglin Pan, Zhengjun Yao. Friction and wear behavior of polytetrafluoro- ethylene fabric composite spherical bearing in swaying[J]. Tribology, Vol. 23(2003), pp.72-75 (In Chinses).

2. Byung Chul Kim, Dong Chang Park, Hak Sung Kim et al. Development of composite spherical bearing[J]. Composite Structures. Vol. 75 ( 2006), p.231–240.

3. Shuai Wang, Xianzhong Zhao, Yiyi Chen et al. Experimental study on spherical plain bearing based joint[J]. Engineering Mechanics, Vol. 24(2007)(Z-II), pp.203-208 (In Chinses).

4. Xuegui Yang, Pan Zeng, Wenkai Tao. Equivalent modeling and structural analysis of trunnion-knuckle bearings of actuator[J]. Engineering Mechanics, Vol. 22(2005), pp.147-152 (In Chinses).

5. Dinghan Xiang, Chunyan Wang, Weifeng Dong. Structural Optimization and Friction and Wear Behavior of a Radial Spherical Plain Bearing[J]. Tribology, Vol. 24(2004), pp.564-567 (In Chinses).

Cited by 6 articles. 订阅此论文施引文献订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献

1. Influence of an outer ring end offset on the service life and eccentric wear defects of self-lubricating spherical plain bearings;Engineering Failure Analysis;2023-01

2. Preparation of a titanium alloy outer ring self-lubricating spherical plain bearing by a two-step extrusion forming process;The International Journal of Advanced Manufacturing Technology;2022-07-08

3. Mesoscopic scale simulation and wear investigation of self-lubricating fabric liner based on representative volume element;Modelling and Simulation in Materials Science and Engineering;2022-01-07

4. Research on damage and failure behaviour of coated self-lubricating spherical plain bearings based on detection of friction torque and temperature rise;Proceedings of the Institution of Mechanical Engineers, Part J: Journal of Engineering Tribology;2021-05-17

5. Design of an experimental setup to determine the coefficient of static friction of the inner rings in contact with the outer rings of radial spherical plain bearings;Tribology International;2018-12