Finite Element Analysis of Beam-Column Connection with Cantilever Beam Splicing

Abstract

Beam-column connection with cantilever beam bolted-splicing is also known as the joint of column-tree moment-resisting frame. The study is still relatively small for the semi-rigid behavior and rotational stiffness of the joint. This paper deal with four specimens of the joints with cantilever beam splicing and four specimens of the welded joints by using three dimensional finite element model analysis. The strain, stress, yield and ultimate loads, yield and ultimate deformations had been compared between the joint with cantilever beam splicing and the welded joint. The analysis results show that, when the splicing area of the joint with cantilever beam splicing was designed more strongly, the stress distribution, the load-displacement curves in elastic working stage, and the initial rotational stiffness are good agreement between the joint with cantilever beam splicing and the welded joint. The hysteresis curves of the joint with cantilever beam splicing were inverse S-shaped, indicating that there was greater slipping deformation because of bolt splicing. The welded joint had no slipping phenomenon.