Affiliation:
1. China University of Ming and Technology
2. Petrochina Coalbed Methane Company Limited
3. Qinghai Institute of Salt Lakes, Chinese Academy of Sciences
Abstract
Coalbed methane drilling can produce drilling fluid waste, and inappropriate treatment will influence the environment and subsequent operation. Because of the scattered coalbed methane well locations and cost reasons, domestic and foreign conventional oil and gas drilling fluid waste method cannot be copied. So the solidified method is more appropriate. Referencing the region of Lin Fen, by detecting five wells’ waste drilling fluid indoor, the indexes are pH, coloration, suspended matter, BOD5, COD, total chromium and hexavalent chromium. The drilling fluid index of waste-polymer is beyond the Grade-2 National Wastewater Discharge Standards, but the waste Fuzzy-Ball based drilling fluid reach the standards. It has been designed indoor that the formula of waste Fuzzy-Ball based drilling fluid solidified method’s which is mainly based on cement. The indexes of leaching solution are pH, coloration, suspended matter(99mg/l), BOD5(52.3mg/l), COD(117.4mg/l), total chromium(0.32mg/l), hexavalent chromium(0.13mg/l) and the leaching solution can reach the Grade-2 National Wastewater Discharge Standards. Solidification mud can achieve without large appliance and can deal with 200m3 waste Fuzzy-Ball based drilling fluid of JU2-H well in 10 days, its indexes of leaching solution can reach the Grade-2 National Sewage Discharge Standards. The strengths must be sure for the later vehicle transporting and the cultivation after land fill. Using Fuzzy-Ball based drilling fluid when drill can ensure the source controlling of waste drilling fluid pollution. At the same time, it can cost lower and operate easier.
Publisher
Trans Tech Publications, Ltd.
Reference8 articles.
1. B.F. Wally, L.A. Reitsema, and G.W. Nance: Treatment of Drilling Fluid Wastes in an Environmentally Acceptable Manner[C]. This paper was presented at the SPE/IADC 1955 Drilling conference held in New Orleans, Louisiana, March 6-8. (1985).
2. PERIE, F.H., SERIS, J.L., MARTIGNON, A.P. Biologycal treatment of drilling waste[C]. SPE 29695. This paper was prepared for presentation at the SPE/EPA Exploration & Production Environmental Conference held In Houston, TX, U.S.A., 27-29 March (1995).
3. G. Ferrari, F. Cecconi, L. Xiao, et al. Drilling Wastes Treatment and Management Practices for Reducing Impact on HSE: ENI/Agip Experiences[C]. SPE 64635. This paper was prepared for presentation at the SPE International Oil and Gas Conference and Exhibition in China held in Beijing, China, 7–10 November (2000).
4. Camila Vega, Mayolett Delgado: Treatment of waste-water/oil emulsions using microwave radiation[C]. SPE 74167. This paper was prepared for presentation at the SPE International Conference on Health, Safety and Environment in Oil and Gas Exploration and Production, 20-22 March 2002, Kuala Lumpur, Malaysia.
5. WANG Xue-chuan, HU Yan-xin, ZHENG Shu-jie, QIANG Tao-tao: Application status of waste drilling fluid treatment technology at home and abroad. Journal of Shanxi University of Science & Technology. v 28, n 6, pp.169-174, Oct 2010 (in Chinese).