Affiliation:
1. Beijing Institute of Technology
2. Chongqing Hongyu Precision Industrial CO., LTD
Abstract
By building up a debugging method about material parameters of concrete impact damage model based on DOE (Design of Experiments) analysis, this paper studies the influence of material parameters of concrete targets on the results of numerical simulation based on quantitative analysis, when the impact velocity is 300m/s and 850m/s respectively. It concludes that when the impact velocity of 300m/s, 5 parameters have considerable effect on the residual velocity of warhead, they are , , , and . Of all 5 parameters, , and can be obtained by calculation therefore it only needs to debug two parameters and according to experiments. Finally, when the impact velocity is 300m/s or so, debug combining the experiments to get a set of concrete impact damage model material parameters to make the results of simulation and experiment anastomosis well.
Publisher
Trans Tech Publications, Ltd.
Reference7 articles.
1. Watstein D. Effect of Straining Rate on the Compression Strength and Elastic Properties. ACI, Journal Proceeding, 1953, 49(8).
2. Soroushian P, et al. Dynamic Constitutive Behavior of Concrete. ACI, Journal, 1986, 83(26).
3. Williams M. Modeling of Local Impact Effects on Plain and Reinforced Concrete. ACI, Structural Journal, 1994, 91(2).
4. Weerheijm J, et al. Structural Response in Impact Tensile Tests on Concrete. AD-A222449, (1990).
5. Huang Shiyuan, Jiang Jiafen. Modern concrete technology. Shanxi: Shanxi technology Press, (1998).