Affiliation:
1. Tianjin University
2. Nankai University
3. Tianjin University of Technology
Abstract
This paper designs a hand-held radio frequency identification and localization terminal based on ARM Cortex-M3 processor and active radio frequency tags based on 8051 processor. This terminal uses STM32F103VET6 as its master controller, these tags use STC12C2052AD as their master controller. They all use Nordic nRF905 as their radio frequency identification module. The system works in 433M/868M/915MHz ISM UHF band and can read, write and locate radio frequency tags within 50m indoors. The actual measurement of active radio frequency tags shows that this terminal is highly stable and comparable in 433M/868M/915M ultra-high frequency radio identification and localization. The test results of this system are also analyzed and presented.
Publisher
Trans Tech Publications, Ltd.
Reference6 articles.
1. Miao Wu, Tingjie Lu, Research on the architecture of Internet of Things, 2010 3rd International Conference on Advanced Computer Theory and Engineering, Proceedings, vol. 5, pp.5484-5487, (2010).
2. Hailan Ding, RFID indoor positioning using RBFNN with L-GEM, 2010 International Conference on Machine Learning and Cybernetics, vol. 5, pp.1147-1152, (2010).
3. Bekkali, Abdelmoula, RFID indoor tracking system based on inter-tags distance measurements, Lecture Notes in Electrical Engineering, vol. 45, pp.41-62, (2009).
4. Chenggan Shan, Yufeng Shan, Lei Yao, Radio Frequency Identification (RFID) Principle and Application, The Electronic Industry Press, Beijing, (2008).
5. Zhenhua Xing, Hongwei Wang, Xiaoni Wang. Design of wireless temperature sensor network based on nRF905,. Advanced Materials Research, vol. 430-432, pp.1988-1991, (2012).