Effect of Al(OH)3 in Enhancing PbSnF4 Anode Performances for Rechargeable Lithium-Ion Battery

Abstract

Two-phase Al(OH)3–PbSnF4 composites (concentrations of aluminum hydroxide are equal to 5 wt.%, 15 wt.% and 30 wt.%) has been prepared by high-energy ball-milling method. The materials were employed as anodes in Li-ion batteries. It was established that PbSnF4-based systems yield high initial capacity of 800–1100 mAh g–1. The reversible specific capacity of Al(OH)3–PbSnF4 (aluminum hydroxide – 15 wt.%) after 10-fold charge–discharge cycling in the range of 2.5–0.005 V attains 120 mAh g–1, while the specific capacity of pure PbSnF4 is equal only to 20 mAh g–1. It has been shown that the deviation from 15 wt.% concentration of Al (OH)3 decreases cycling stability of lead fluorostannate (II).