Liquid Phase Sintering of (Ti,W)C-Ni-Co-Cr Cermets: Microstructure and Abrasive Wear Behavior-Reference-Cited by-同舟云学术

Liquid Phase Sintering of (Ti,W)C-Ni-Co-Cr Cermets: Microstructure and Abrasive Wear Behavior

Published:2018-05 Issue: Volume:274 Page:1-8
ISSN:1662-9779
Container-title:Solid State Phenomena
language:
Short-container-title:SSP

Author:

Iparraguirre I.¹,Lozada L.¹,Ibarreta F.²,Martinez R.²,Sanchez J.M.¹

Affiliation:

1. CEIT-IK4

2. FMD CARBIDE S.A.L

Abstract

TiC-WC-(Ni,Co,Cr) cermets are potential candidates for the substitution of straight cemented carbides in certain wear applications. This work analyses the effect of Ti/W and Co/Ni ratios on the microstructure and abrasion resistance of this type of cermets. From a microstructural point of view, cermets in the (Ti,W)C-(Ni,Co,Cr) pseudo-binary region show uncontrolled (Ti,W)C grain growth and a high degree of contiguity of the carbide phase. A microstructural refinement is observed as the Ti/W ratio decreases, especially when WC precipitation occurs. Abrasion resistance in these materials is dominated by hardness.

Publisher

Trans Tech Publications, Ltd.

Subject

Condensed Matter Physics,General Materials Science,Atomic and Molecular Physics, and Optics

Link

https://www.scientific.net/SSP.274.1.pdf

Reference15 articles.

1. Critical raw materials for the EU", Raw Material Supply Group, European Commission, Entreprise and Industry, July (2010).https://ec.europa.eu/growth/sectors/raw-materials/specific-interest/critical_en.

2. Report on Critical Raw Materials for the EU, May 2014, Report of the Ad hoc Working Group on defining critical raw materials. http://www.catalysiscluster.eu.

3. M. Seo, J. Kim, S. Kang, Int. Journal of Refractory Metals and Hard Materials 29 (2011) 424–428.

4. V.T. Golovchan, Int. Journal of Refractory Metals and Hard Materials 26 (2008) 301–305.

5. H. Doi Advanced TiC and TiC-TiN based cermets,, Inst. Phys. Conf. Ser. No. 75, Chapter 6, Bristol and Boston: Adam Hilger Ltd.; Almond E A, Brookes C A, Warren R, Eds., (1986), 489-523.

Cited by 6 articles. 订阅此论文施引文献订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献

1. Synergistic effect of Nb and Mo on the microstructural formation of the Ti(C,N)-high chromium ferrous-based cermets;International Journal of Refractory Metals and Hard Materials;2024-08

2. Influence of grit particles characteristics on the abrasive wear micro-mechanisms of NbC-Ni and WC-Co hard materials;International Journal of Refractory Metals and Hard Materials;2024-01

3. Abrasion and Erosion Resistance of Cermets: A Review;Materials;2021-12-22

4. Phase diagrams in alternative hard materials: Validation of thermodynamic simulation through high temperature x-ray diffraction, differential thermal analysis and microstructural characterization;International Journal of Refractory Metals and Hard Materials;2021-06

5. Preparation and characterization of composite WC / Co through rapid omnidirectional compaction;Journal of Alloys and Compounds;2021-04