Affiliation:
1. STU Bratislava
2. STATIKA Čížek s. r. o.
Abstract
The subject of this article is a comparison of the calculation methods for slender reinforced concrete columns, which are likely to lose stability, and therefore it is necessary to take into account the influence of the second order theory. The columns were calculated by the nominal curvature method [1] Chap.5.8.8 and the general nonlinear method [1] Chap.5.8.6 (3). Our comparison was aimed on the reliability of the design of the columns and the cost of the column. The analysis was made for the columns we selected from the halls built in practice. For this reason, we have asked for co-operation with Statika Čížek s.r.o.. This company has designed lot of hall objects during numerous years of its practise. In this study, we proposed a selected column located in a particular hall object. Parameters of the selected column have been slightly modified against the practical design. Reinforcement of selected column was designed using the curvature method. This proposal was then subjected to "optimization", where the task was to minimize the amount of concrete and minimize the amount of reinforcement with usage of a general nonlinear method. Then we compared the results of this analysis in terms of reliability and cost of production. This article aims to alert authorized engineers to be careful with usage of the general non-linear method in practice. It is questionable, whether saving money on the cost of building structure is worthwhile to design columns with significantly lower reliability. Sometimes even with the risk of a loss of stability that belongs to the category - brittle failures
Publisher
Trans Tech Publications, Ltd.
Subject
Condensed Matter Physics,General Materials Science,Atomic and Molecular Physics, and Optics
Reference10 articles.
1. (2004). EN 1992-1-1:2004 Eurcode 2: Design of concrete structures - Part 1-1: General rules and rules buildings.
2. (2011). ÖNORM B 1992-1-1:2011 Eurocode 2: Bemessung und Konstruktion von Stahlbeton- und Spannbetontragwerken Teil 1-1.
3. Benko, V. (2001). Nichtlineare Berechnung von Stahlbetondruckglieder. (Nonlinear analysis of reinforced concrete compression members). In.: Innovationen im Betonbau 27. Fortbildungsveranstaltung, OVBB Heft 47, s. 9–12.
4. Benko, V. et al. (2016). Failure of Slender Columns of Loss of stability. Journal of Composites for Construction ASCE.
5. Kendický, P. (2016). Stabilitné zlyhanie betónových stĺpov. In Juniorstav 2016: VUT v Brně, 2016, CD-ROM, ISBN 978-80-214-5311-1.
Cited by
3 articles.
订阅此论文施引文献
订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献