Dynamic Behaviour of Reinforcing Steel Bars in Tension

Abstract

In this paper the preliminary results of the tensile behavior of reinforced steel in a large range of strain rates are presented. Tensile testing at several strain rates, using different experimental set-ups, was carried out. For the quasi-static tests a universal electromechanical testing machine with the maximum load-bearing capacity of 50 kN was used, while for the intermediate and high-strain rate regimes a hydro-pneumatic apparatus and a JRC-Split Hopkinson Tensile Bar respectively were used. The target strain rates were set at the following five levels: 10-3, 30, 250, 500, and 1000 1/s. The specimens used in this research were round samples having 3mm in diameter and 5mm of gauge length obtained from reinforcing bars. Finally, the material parameters for Cowper-Symonds and Johnson-Cook models were determined.