Grinding of Cermets with Cup-Wheels

Abstract

Cup-wheels are frequently used to grind cermets, a difficult-to-grind material. An investigation was made into the transient geometry of the cup-wheel rim, grit dulling, wheel loading, and wheel self-sharpening with chip thickness. Tests were performed on a saw-tip grinding machine and specific energies, G-ratios and rim geometries were measured. Results showed that, like grinding of tungsten-carbide, loading is prevalent. However, unlike grinding of tungsten-carbide, grit dulling is also prevalent and wheel conditioning is of limited use. Much better results, particularly with respect to surface finish, can be obtained if the wheel is trued to a predetermined geometry. In addition, grinding parameters must be chosen to induce wheel self-sharpening. Practical recommendations are given.