Circular-Arc Radial Cams with One Connection Arc-Reference-Cited by-同舟云学术

Circular-Arc Radial Cams with One Connection Arc

Published:2020-02 Issue: Volume:896 Page:83-94
ISSN:1662-7482
Container-title:Applied Mechanics and Materials
language:
Short-container-title:AMM

Author:

Cretu Simona Mariana¹,Geonea Ionuţ Daniel¹

Affiliation:

1. University of Craiova

Abstract

This paper deals with the geometric and kinematic analysis of the circular-arc profile cams with one connection arc. If the maximum lift of the follower is required, it is shown that it is possible to connect two circular-arcs – that are defined by center of curvature and radius – through a single circular-arc, and the connection points result. But, if the connection points of two given circular-arcs of the cam profile are required, at least two circular-arcs are needed to connect them. The specific equations for the geometric analysis for one circular-arc profile are described. Also, for two mechanisms, one with straight-line profile and another with one circular-arc connection profile, the geometric and kinematic analysis and simulations of the movements using SolidWorks and ADAMS programs are presented

Publisher

Trans Tech Publications, Ltd.

Link

https://www.scientific.net/AMM.896.83.pdf

Reference10 articles.

1. Bizic Milan, and al. Modeling profile and kinematic analysis of two circular-arc cams, Engineering with Computers, 29/4 (2012).

2. S.M. Cretu, Analiza mecanismelor cu came. Diagrame cinematice (II), in: Ghidul lucrarilor de laborator la disciplina Mecanisme, Vol.II, Ed. Sitech, 2017, pp.58-64.

3. M. Ceccarelli, G. Carbonne, C. Lanni, E. Ottaviano, A fairly simple method to identify the curvature of a cam profile, ASME International Design Engineering Technical Conferences IDETC'04, Salt Lake City, paper DETC2004-57387 (2004).

4. M. Ceccarelli, C. Lanni, G. Carbonne, Numerical and experimental analysis of the cam profiles with circular-arcs, IX, Int. Conf. on the Theory of Machines and Mechanism, Liberec (2004) 189-207.

5. M. Ceccarelli, C. Tavolieri, C. Lanni, An experimental analysis for four circular-arc cams, NaCoMM (2005) 53-59.