Effect of Rotor Tip Gap Variation at the Rear Stages of an Axial Flow Compressor

Abstract

In this paper, detailed analysis of the tip flow of an axial compressor rotor blade has been carried out using the commercial CFD package ANSYS CFX. The rotor blade was designed such that it is reminiscent of the rear stages of a multi-stage axial compressor. The effects of varying tip gaps are studied using CFD simulations for overall pressure rise and flow physics of the tip flow at the design point and near the peak pressure point. Rig tests of a low speed research compressor rotor with 3% tip clearance provided characteristics plots for validation of the CFD results. With increase in clearance from 1% to 4%, the rotor pressure rise at the design point was observed to decrease linearly. Increase in the clearance increases the cross flow across the tip; however, the magnitude of the average jet velocity crossing the tip decreases. The tip leakage vortex was observed to stay close to the suction surface with increase in clearance.