Contribution to Milling of Materials on Ni Base-Reference-Cited by-同舟云学术

Contribution to Milling of Materials on Ni Base

Published:2012-11 Issue: Volume:217-219 Page:2056-2059
ISSN:1662-7482
Container-title:Applied Mechanics and Materials
language:
Short-container-title:AMM

Author:

Mrkvica Ivan¹,Janoš Miroslav²,Sysel Petr³

Affiliation:

1. VSB -Technical University of Ostrava

2. VSB-Technical University of Ostrava

3. Hella Cz, s.r.o.

Abstract

This article deals with milling possibilities of nickel superalloy - Inconel 718. The different cemented carbides were applied for cutting process. These inserts were produced by Pramet Tools Ltd. company. This paper discusses durability of cutting inserts, the different intensity of tool wear at various cutting parameters. The most suitable cutting conditions are chosen in the scope of applied tools.

Publisher

Trans Tech Publications, Ltd.

Link

https://www.scientific.net/AMM.217-219.2056.pdf

Reference11 articles.

1. Melcher, G. and Gaber, H. Turning of Inconel, Hastelloy, Hayness and Co. Werkstatt und Betrieb No. 3, pp.40-42. (2008).

2. Panda, A., Jurko, J., Džupon, M. and PANDOVÁ, I. Optimalization of heat treatment bearings rings with goal to eliminate deformation of material. Chemické listy. Vol. 105, no. S, pp.459-461. ISSN 0009-2770. (2011).

3. Neslušan, M. and Czán, A. Machining of Ti and NI alloys. Publ. University of Zilina, 193 p. (2001).

4. Ezugwu E.O., Bonney, J., Fadare, D.A. and Sales, W.F. Machining of nickel-base, Inconel 718, alloy with ceramic tools under finishing conditions with various coolant supply pressures [online] 2005, [cit. 2010-10-05]. Information on http: /www. science direct. com/science.

5. Specialmetals. com [online]. 27. 6. 2007 [cit. 2010-12-11]. Inconel alloy 718. pdf. Information on http: /www. specialmetals. com/ documents/Inconel%20alloy%20718. pdf>.

Cited by 21 articles. 订阅此论文施引文献订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献

1. ABOUT WEAR RESISTANCE OF LINEAR BLOCK-POLYURETHANES;MM Science Journal;2020-11-11

2. WELDING METHODS OF FILAMENTS USED IN FFF/FDM 3D PRINTING TECHNOLOGY;MM Science Journal;2020-11-11

3. INNOVATION AND RECYCLING OF ALUMINIUM CASTINGS IN THE FORM OF PLASTIC REPAIR METAL ADDITION FOLLOWED BY MACHINING;MM Science Journal;2020-10-07

4. THE CONDITIONS FOR OBTAINING SELF-ORGANIZED STRUCTURES ON THE TRIBOLOGICAL SURFACES OF COMPOSITE MATERIALS BASED ON POLYTETRAFLUOROETHYLENE WHICH IS USED IN AUTOMOTIVE AND OTHER DEMANDING TECHNOLOGIES;MM Science Journal;2019-12-11

5. HYDROXYAPATITE AND ZINC OXIDE BASED TWO-LAYER COATING, DEPOSITED ON TI6AL4V SUBSTRATE;MM Science Journal;2019-12-11