Affiliation:
1. Federal Institute for Materials Research and Testing
2. Helmut König Technische Keramik Ltd.
Abstract
It has been successfully demonstrated that ceramic materials can be joined in the green
state without a second phase by using low pressure injection molded parts. The investigation of the
joining interface revealed that a high quality interface can be achieved by carefully adjusting the
different manufacturing steps. The use of monomodal particle size distribution in the used powder
CT3000SG is inferior to a broader particle size distribution obtained by replacing 33% of the finer
alumina powder by coarser CT1200SG. In this way the dewaxing process is significantly improved
when the wall thickness of the part exceeds 3 mm. The investigation of the mechanical properties of
the joined and sintered parts revealed, that the bending strength of the joined specimens achieved
about 80 % of the unjoined, monolithic specimens.
Publisher
Trans Tech Publications, Ltd.
Reference9 articles.
1. US patent N 4, 416, 603.
2. E. Zorzi, C.A. Perottoni and J.A.H. da Jornada, A new partially isostatic method for debinding of low-pressure injection molded ceramic parts, Materials Letters, 57, (2003) p.3784.
3. R.E.F. Quevedo Nogueira, A Campos Bezerra, F.C. dos Santos, M.R. de Sousa and W. Acchar, Low-Pressure Injection Molding of Alumina Ceramics Using a Carnauba Wax Binder: Preliminary results, Key Engineering Materials , 189-191, (2001) p.67.
4. R. Knitter, W. Bauer and C. Fechler, Ceramics in micr-reactiontechnology: materials and processing. Process miniaturization, Proceedings of 2 nd Int. Conference on Micro Reaction Technology, New Orleans, March 8-12, (1998) p.164.
5. R. Knitter, W. Bauer, D. Göhring and J. Haußelt, Manufacturing of ceramic micro components by a rapid prototyping process chain, Adv. Eng. Materials 3[1-2], (2001) p.49.
Cited by
6 articles.
订阅此论文施引文献
订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献