Influences of Melt Temperature on Casting Structure of Al-Cu-Mn Alloy Treated by Electric Pulse Modification

Abstract

It was investigated that the effect of electric pulse modification (EPM) on the hot tearing of Al-5%Cu-0.8%Mn alloy. The results indicate that hot tearing tendency of all samples can be reduced treated by electric pulse with different parameters, moreover, hot tearing stress of alloy with EPM was enhanced 3 times or so than that of samples without treatment. Decreasing the quantity of eutectic in grain boundaries, decreasing the end-solidifying temperature of the alloys, and refining the grains are main causations for increasing hot tearing resistance of Al-5%Cu-0.8%Mn alloy by electric pulse modification.