Investigation of the Relationships between Billet Reheating and Semi-Solid Die-Casting

Abstract

The non-dendritic of A356 aluminum alloy billet was reheated to meet the requirements of the semi-solid microstructure by three different kinds of power, achieving the same final temperature of 863K. Subsequently, under the same conditions of die-casting (thixoforming), the microstructure was observed, surface hardness and tensile properties were measured. Afterwards, quantitative analysis was made for the microstructure of the reheated semi-solid of billet and the thixoforming parts. The results showed that the larger induction reheating power of the billet, the smaller the grain size of its microstructure and the higher surface hardness and the better mechanical properties of its thixoforming sample. Finally, through studying on the relationship between the microstructure of the semi-solid billet of A356 aluminum alloy and the mechanical properties of the thixoforming sample, we primarily achieved the reverse design of microstructure.