Affiliation:
1. University of Stuttgart
Abstract
A combination of several manufacturing process steps in a simultaneous manner allows savings in energy costs, reduced investment and economizing logistical efforts. In particular, this investigation deals with manufacturing and joining of a frictionally engaged shaft-hub-connection by lateral extrusion. One key challenge of such new process management is the prior layout of both optimal friction conditions during manufacturing process on the one hand and highly expected static friction interaction of joined components in order to transmit tangential and axial forces on the other hand. Therefore, cylindrical, thin-walled hubs have been manufactured and joined to shafts. Several parameters describing the tribological system between shaft and hub such as contact surface topographies and lubricant, have been varied within this study. By measuring the radial deformation of the hub, the contact pressure is determined and a normal force applied to the contact surface of shaft and hub is calculated. When separating hub and shaft in a destructive manner, an extensive axial tensile force is applied and measured. According to Coulomb's friction law, specific friction coefficients are calculated depending on manufacturing process parameters as mentioned above.
Publisher
Trans Tech Publications, Ltd.
Reference12 articles.
1. Mori, K.; Bay, N.; Fratini, L.; Micari, F.; Tekkaya, A. E.: Joining by plastic deformation. CIRP Annals – Manufacturing Technology 2013, Volume 62, Issue 2, 2013, pages 673–694.
2. Popov, V. L.: Contact Mechanics and Friction. 2009 Springer-Verlag Berlin Heidelberg, ISBN 978-3-540-88836-9 e-ISBN 978-3-540-88837-6.
3. Schätzle, W. : Querfließpressen eines Flansches oder Bundes an zylindrischen Vollkörpern aus Stahl (engl.: Lateral extrusion of a flange or collar to solid cylindrical bodies made of steel). Berichte aus dem Institut für Umformtechnik. Hrsg.: Prof. Dr. -Ing. K. Lange. Springer-Verlag, Dissertation (1987).
4. Dörr, F. and Liewald, M.: Werkzeugkonzept und Verfahrensentwicklung zum Umformfügen einer Welle-Nabe-Verbindung durch Kalt-Quer-Fließpressen (engl.: Tool design and process development of a joining by forming process to manufacture a shaft-hub-connection by lateral extrusion). 5. VDI-Fachtagung: Welle-Nabe-Verbindungen: Gestaltung – Fertigung – Anwendungen; 25. – 26. September 2012, Nürtingen near Stuttgart.
5. Reinholz, R.: Tragfähigkeit von P3G-Welle-Nabe-Verbindungen bei Dauerschwing-beanspruchung (engl.: Load capacity of P3G shaft-hub-connections in fatigue loading), Dissertation, Fachbereich Maschinenbau und Produktionstechnik der Technischen Universität Berlin, ISBN 3-7983-1607-4, Berlin, (1994).
Cited by
2 articles.
订阅此论文施引文献
订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献