Influence of Second Phase Particles on Recrystallisation of Cold-Rolled Low Carbon Microalloyed Steels during Isothermal Annealing-Reference-Cited by-同舟云学术

Influence of Second Phase Particles on Recrystallisation of Cold-Rolled Low Carbon Microalloyed Steels during Isothermal Annealing

Published:2005-11 Issue: Volume:500-501 Page:803-0
ISSN:1662-9752
Container-title:Materials Science Forum
language:
Short-container-title:MSF

Author:

Capdevila Carlos¹,De Cock Tommy²,García-Mateo Carlos¹^ORCID,Caballero Francisca García¹,García de Andrés Carlos¹

Affiliation:

1. Centro Nacional de Investigaciones Metalúrgicas (CENIM-CSIC)

2. CENIM-CSIC

Abstract

The recrystallisation behaviour of two cold-rolled low carbon microalloyed steels with different Ti content was investigated by thermoelectric power (TEP) measurements and metallography. It was shown that recrystallisation was more sluggish in the higher Ti grade steel as compare with traditional ELC and LC steels. The existence of Ti in solid solution together with the pinning effect of Nb-, V- and Ti-rich particles are likely to be responsible for such behaviour. Metallographic etching with picral revealed that cementite act as preferential nucleation site for recrystallisation.

Publisher

Trans Tech Publications, Ltd.

Subject

Mechanical Engineering,Mechanics of Materials,Condensed Matter Physics,General Materials Science

Link

https://www.scientific.net/MSF.500-501.803.pdf

Reference6 articles.

1. R.K. Ray, J.J. Jonas and R.E. Hook: Inter. Mat. Rev. Vol. 39 No. 4 (1994), p.129.

2. A. Ney Jose Luiggi: Metall. Mater. Trans. A Vol. 29 (1998), p.2669.

3. Oatley C. W.: The scanning electron microscope, part 1, the instrument, (1st ed. Cambridge University Press, UK 1972).

4. Metallurgical and Thermochemical Databank, (Teddington, Middlessex, National Physical Laboratory, UK 1996), p.1.

5. V. Sardoy, M. Bouzekri, P. Zimmer and J. Merlin: Proc. of Int. Symp. on Modern LC and ULC Sheet Steels for Cold Forming: Processing and Properties, (Conference Book, Ed. W. Bleck, Vol. 1, Aachen 1998).

Cited by 9 articles. 订阅此论文施引文献订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献

1. Recrystallisation Characteristics of a Cu Bearing HSLA Steel Assessed Through High Temperature Compressive Deformation;Defence Science Journal;2023-03-09

2. A Study of Recrystallization Behavior of Two Ni-Cu–Containing High-Strength Steels with Different Mn Contents;Materials Performance and Characterization;2019-11-25

3. Ferrite recrystallization and austenite formation during annealing of cold-rolled advanced high-strength steels: In situ synchrotron X-ray diffraction and modeling;Materials Characterization;2019-08

4. Combined Effect of Heating Rate and Microalloying Elements on Recrystallization During Annealing of Dual-Phase Steels;Metallurgical and Materials Transactions A;2018-05-04

5. Determination of hot and cold rolling textures of steels: combined Bayesian neural network model;Materials Science and Technology;2012-03