Affiliation:
1. University of California Santa Barbara
2. Purdue University
3. University of Pittsburgh
Abstract
The deformation field associated with chip formation in plane strain (2-D) machining has been simulated using the finite element method (FEM), with the objective of developing 2-D machining as an experimental technique for studying very large strain deformation phenomena. The principal machining parameters are the tool rake angle, cutting velocity and the friction at the toolchip interface while the deformation field parameters are strain, strain rate and temperature. The relation between rake angle and the shear strain in the deformation zone is studied for the low-speed cutting of lead. This correspondence is validated by comparison with measurements of the deformation parameters made by applying a Particle Image Velocimetry (PIV) technique to highspeed photographic image sequences of the deformation. It is shown that plastic strains in the range of 1-15 can be realized in a controlled manner by appropriate choice of the rake angle. The unique capabilities offered by 2-D machining for studying micro- and nano- mechanics of large strain deformation, and the creation of ultra-fine grained materials are highlighted in the context of these results.
Publisher
Trans Tech Publications, Ltd.
Subject
Mechanical Engineering,Mechanics of Materials,Condensed Matter Physics,General Materials Science
Reference16 articles.
1. T.L. Brown, S. Swaminathan, B.C. Rao, R.F. Kezar, S. Chandrasekar, W.D. Compton, K.P. Trumble, A.H. King, Machining as a Method for Studying Effects of Very Large Strain Deformation, Ultrafine Grained Materials III, The Minerals, Metals and Materials Society, (2004).
2. T.L. Brown, S. Swaminathan, S. Chandrasekar, W.D. Compton, A.H. King, K.P. Trumble, Low-Cost Manufacturing Process for Nanostructured Metals and Alloys, J. Mater. Res., vol. 17(10), pp.2484-2488, (2002).
3. S. Lee, J. Hwang, M.R. Shankar, S. Chandrasekar, W.D. Compton, Velocity and Strain Distrbutions in Two-Dimensional Machining, Proceedings of IMECE04, (2004).
4. M.C. Shaw, Metal Cutting Principles, Oxford Series in Advanced Manufacturing, Claredon, Oxford, (1984).
5. P.L.B. Oxley, The Mechanics of Machining: An Analytical Approach to Assessing Machinability, John Wiley & Sons, New York, (1989).
Cited by
12 articles.
订阅此论文施引文献
订阅此论文施引文献,注册后可以免费订阅5篇论文的施引文献,订阅后可以查看论文全部施引文献