Characterisation of Plasticity Response for Reciprocating Sliding Wear Test of Ti-6Al-4V under Variables Number of Cycles

Abstract

Reciprocating sliding wear test of uncoated titanium alloy, Ti-6Al-4V is investigated using pin-on-flat contact arrangement of Ti-6Al-4V/Ti-6Al-4V pair under variable number of cycles at low number of cycles. The worn surfaces of the titanium alloy specimens were analyzed with the use of optical microscope (2D and 3D OM) and Vickers Hardness analysis was carried on. The pattern of the wear scar characteristics determined and the finding at the end of wear track had been focus through the presence at the end of wear track. It is suggesting an evidence of plastic deformation with the increasing in hardness value. The increase in hardness value at the end of wear track indicates increase in the plastic deformation with increasing number of cycles.