Numerical Models of End-Plate Assembling Bolt Connection of Angle Profiles-Reference-Cited by-同舟云学术

Numerical Models of End-Plate Assembling Bolt Connection of Angle Profiles

Published:2015-04 Issue: Volume:752-753 Page:552-557
ISSN:1662-7482
Container-title:Applied Mechanics and Materials
language:
Short-container-title:AMM

Author:

Jurčíková Anežka¹,Pařenica Přemysl²,Rosmanit Miroslav²

Affiliation:

1. VSB-Technical University of Ostrava

2. VSB-Technical University of Ostrava

Abstract

The aim of this work was to create numerical models of the common truss-type assembling joints of L-profiles. Two different models were created – basic (simplified) model of joint and more accurate model which corresponds to the experimental specimens in preparation. Models with different end-plate thicknesses and consequently with different failure modes were solved. The results obtained from numerical models were compared with the analytical solution of such joints using the Eurocode procedure recommended in EN 1993-1-8. These results are planned to be verified and further developed based on planned experiments.

Publisher

Trans Tech Publications, Ltd.

Link

https://www.scientific.net/AMM.752-753.552.pdf

Reference6 articles.

1. L. Katula and P. Márai, Study the prying effect on bolted base-plate connections, Period. Polytech. Civil. Eng. 57, 2 (2013) 157-172.

2. E.G. Hantouche, G.A. Rassati, A.R. Kukreti and J.A. Swanson, Built-up T-stub connections for moment resisting frames: Experimental and finite element investigation for prequalification, Eng. Struct. 43 (2012) 139-148.

3. EN 1993-1-8, Eurocode 3: Design of steel structures - Part 1-8: Design of joints. (2005).

4. E.G. Hantouche, A.R. Kukreti and G.A. Rassati, Investigation of secondary prying in thick built-up T-stub connections using nonlinear finite element modeling, Eng. Struct. 36 (2012) 113-122.

5. A. Jurčíková and M. Rosmanit, FEM Model of Joint Consisting RHS and HEA Profiles, In: STEEL STRUCTURES AND BRIDGES 2012: 23rd Czech and Slovak International Conference, Podbanské, September 2012. Procedia Eng. 40 (2012) 6.