Abstract
A thin corrugated metal gasket had been developed for low pressure work condition. In this study, thin corrugated metal prototype gasket was tested by using water pressure test. A Kyowa T-150N was used as water pressure tester. The experiment was conducted after ensuring that there was no leakage in each joint part. The leak test can only indicate two conditions of leakage which are leak or no leak. Pressure applied in the water pressure test was 200 psi, with 5 minutes of lapse time. The leakage was determined by the presence of liquid from the flange and the change in pressure gauge. Based on leak test results, it can be denoted that thin corrugated metal gasket can be used for 200 psi working pressure and 2.2 – 3.3 kN tightening load.
Publisher
Trans Tech Publications, Ltd.
Reference7 articles.
1. Choiron M. A, Purnowidodo A., Optimum Shape and Dies Design for New Thin Metal Gasket by Using Simulation Experimen, Applied Mechanics and Materials Vol. 575 (2014) pp.271-275.
2. Haruyama S., Choiron M. A, Kaminishi K., A Study of Design Standard and Performance Evaluation on New Metallic Gasket, Proceeding of the 2nd International Symposium on Digital Manufacturing, China, (2009) pp.107-113.
3. Abid M., Nash D.H., A Parametric Study of Metal-To-Metal Contact Flanges with Optimized Geometry for Safe Stress and No-Leak Conditions, International Journal Pressure Vessels and Piping 81 (2004) pp.67-74.
4. Abid M., Nash D.H., Structural Strength: Gasketed Vs Non-Gasketed Flange Joint Under Bolt Up and Operating Condition, International Journal of Solids and Structures 43 (2006) pp.4616-4629.
5. Choiron M. A, Haruyama S., Kaminishi K., Tightening Evaluation of New 400A Size Metal Gasket, Proceedings of the 8th International Conference on Innovation and Management, (2011) pp.307-312.
Cited by
1 articles.
订阅此论文施引文献
订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献