The Effect of pH and Monomer Concentration on Polyaniline Thin Films Grown Using Electrodeposition

Abstract

Polyaniline (PANI) thin films were successfully prepared from an aqueous electrolyte bath containing aniline and sulphuric acid (H2SO4) using electrodeposition method. The present study demonstrates that the properties of PANI thin film depends on the variation of pH and aniline concentration in prepared precursor. The optical and structural of PANI thin films were characterized using UV-Visible spectrometer (UV-Vis), X-ray diffraction spectrometer (XRD), Fourier Transform Infra-Red spectrometer (FTIR) and Raman spectrometer. PANI layer grown at pH 2.00 displayed green colour layer which denoted as emeraldine base (half oxidized state of PANI) while at pH 3.80 the colour of PANI layer was yellow representing the leucoemeraldine base (fully reduced state of PANI). Result obtained from FTIR confirmed the footprint of PANI and Raman spectrometer confirmed the half oxidized emeraldine base of PANI. Optical analysis using UV-Vis demonstrated the smallest energy band gap, Eg of PANI is 3.54 eV for sample with 0.50 M aniline concentration and pH 2.00. The trend shows that the bandgap of PANI is increased as the pH increased from 2.00 to 3.80. XRD result showed that all the deposited PANI layers were amorphous. Full characterization of this material is providing some information on PANI behavior due to pH and concentration in the prepared precursor.