Affiliation:
1. Universiti Malaysia Perlis (UniMAP)
2. Uiversiti Teknikal Malaysia Melaka
Abstract
This paper presents a theoretical analysis on energy consumption for industrial robots. In this project, the industrial robot used is a virtual robot resembling the FANUC LR Mate 200iB robotic arm. The first two joints consume the most electrical energy, this research focuses only on the first two joints. The calculation of the electrical energy consumed is based on a previous established research done by Herman (2009) from Universiti Teknikal Malaysia Melaka (UTeM) in the year 2009. In this research, three different time intervals were used to set the speed of the robotic arm to be at 50%, 100% and 200% speed and they were tested on 10 different angles with 10 time intervals for the 1st and the 2nd robotic joints.
Publisher
Trans Tech Publications, Ltd.
Reference5 articles.
1. W.B. Heginbotham, Where goes industrial robot technology?, Production Engineer 55 (3)(1976) 125-130.
2. O. Ogorodnikova, Robot introduction in human work environment, Developments, challenges and solutions, Budapest University of Technology and Economics, (2007).
3. The Energy Conservation Centre (ECC), Japan, Output of a Seminar on Energy Conservation in Textile Industry (Handy Manual), (1992).
4. A. Vergnano, T. Carl, L. Bengt, F. Peter, P. Marcello, L. Francesco, and B. Stephan, Modelling and optimization of energy consumption in cooperative multi-robot systems, Automation Science and Engineering, IEEE Transactions 9(2) (2012).
5. Y. Zhang. Beitrag zur modellgestutzten optimalen Trajek- torienplanung fur Industrieroboter ¨ . PhD thesis, TU Berlin, (1993).
Cited by
1 articles.
订阅此论文施引文献
订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献