Improving the Efficiency of Strip Cladding by the Control of Electrode Metal Transfer-Reference-Cited by-同舟云学术

Improving the Efficiency of Strip Cladding by the Control of Electrode Metal Transfer

Published:2014-10 Issue: Volume:682 Page:266-269
ISSN:1662-7482
Container-title:Applied Mechanics and Materials
language:
Short-container-title:AMM

Author:

Ivanov Vitaliy¹,Lavrova Elena¹

Affiliation:

1. Pryazovskyi State Technical University

Abstract

The technology and equipment for pulsed feed of strip electrode for electric arc cladding was developed. The influence of transfer control parameters on the electrode melting process was investigated. Found that pulsing feed of the strip electrode provides optimum heat input into the base metal, stable penetration without defects of the bead formation.

Publisher

Trans Tech Publications, Ltd.

Link

https://www.scientific.net/AMM.682.266.pdf

Reference6 articles.

1. Paton B.E., Lebedev V.A. Analysis of technical and technological capabilities pulsed wire feed processes in arc welding and surfacing / Welding production. - 2002. - № 2. - Pp. 24 - 31.

2. Lebedev V.A. Mechanisms of pulsed wire feed-controlled pulse parameters / V.A. Lebedev, V.G. Pichak / The Paton Welding Journal. - 2001. - № 5. - C. 31 - 37.

3. Chinakhov D.A. Calculation of Gas-dynamic Impact of the Active Shielding Gas on the Electrode Metal Drop in Gas Jet Shielded Welding / Applied Mechanics and Materials. – Vol. 379 (2013). – Pp. 188-194.

4. Gribovsky G., Kravchuk B., Lenivkin V.А. The influence of two-layer ring stream of shielding gases on the welding process with consumable electrode / Welding production. – 1996. – № 4. – P. 6–8.

5. A.N. Serenko, E.V. Lavrova, V.P. Ivanov and V.A. Serenko, UA Patent 101288. (2013).

Cited by 12 articles. 订阅此论文施引文献订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献

1. MATHEMATICAL MODELLING OF FLUX-CORED LAYER FORMATION;Ukrainian Journal of Mechanical Engineering and Materials Science;2023

2. Research of Drop Formation during Electric Arc Surfacing with the Use of Mechanical Control Impacts on the Electrode;Materials Science Forum;2022-06-17

3. Investigation of the Heat-Affected Zone Properties During Cladding of Power Equipment with Austenitic Materials Using Control Mechanical Impacts on the Strip Electrode;Materials Science Forum;2021-07-13

4. Electric Arc Deposition of an Anticorrosive Layer with Two Strip Electrodes;Solid State Phenomena;2020-05

5. Calculation of the penetration zone geometric parameters at surfacing with a strip electrode;Eastern-European Journal of Enterprise Technologies;2019-12-17