Affiliation:
1. University Tun Hussein Onn Malaysia
2. Universiti Tun Hussein Onn Malaysia
Abstract
This paper presents a research on composition photo absorber (Sudan I) effect based on curing parameter, the Liquid Crystal Display (LCD) projector as energy light source initiated the photo reactive polymer. The polymer based material with composition of 1, 6-Hexanediol dicrylate, Phenylbis (2,4,6-trimethylbenzoyl) phosphine oxide with varied Sudan I concentration was used to build 3D structures. The structure was fabricated with three different photo absorber concentrations 0.002%, 0.003%. and 0.006%. of Sudan I. In this experiment the photoreactive polymer solidification phenomena was evaluated.The experiment result obtained, that exposed time of the varied photo absorber was most significantly affect the surface roughness values and the solidification layer time regardless the layer thickness. This work represents that photo absorber composition solution gave a different characteristics for 3D microstructure fabrication.
Publisher
Trans Tech Publications, Ltd.
Reference8 articles.
1. D Chua, C.K., Leong, K.F. and Lim, C.S. ). ed. Rapid Prototyping: Principles and Applications. World Scientific Publishing Singapore, (2003).
2. Gebhardt, A., ed. Rapid Prototyping. Hanser Gardner Publications: Cincinnati, OH. (2003).
3. Ikuta K, H.K., Real three-dimensional microfabrication using stereolithography and metal mold. Proc IEEE, (International Workshop on Micro Electro Mechanical Systems(MEMS'93) (1993)pp.42-47.
4. Bertsch, A., Zissi, S., Jezequel, J.Y., Corbel,S. andAndre, J.C., Microstereophotolithography using a liquidcrystal display as dynamic mask-generator. Microsystem Technologies,. Vol. 3 (No. 2): (1997)pp.42-47.
5. Bertsch A, L.H., Renaud P, 3D microfabrication bycombining microstereolithography and Thick resist Uv lithography. Sens Actuators, (1999): pp.14-23.
Cited by
6 articles.
订阅此论文施引文献
订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献