Affiliation:
1. Hunan University of Technology
2. Central South University
Abstract
Through the analyses of experiment,mechanism of dislocation and coupling of grinding temperature and deformation field,many conclusions are gotten.Firstly,a tempering metamorphic layer of lower hardness is formed in hardening zones of grinding layer of spiral bevel gear. Secondly,the microstructure of grinding tooth surface is acicular martensite+residual austenite+ a small amount of carbides,and it’s outside to the inside presents the variation of "fine→coarser→finer".Thirdly, the critical condition of grinding burns is obtained,that is when grinding temperature is above 600°C,metamorphic layer depth is greater than 0.2mm or more. The formation characteristics of grinding cracks is also revealed. These provide a basis for the NC grinding quality control of spiral bevel gears.
Publisher
Trans Tech Publications, Ltd.
Reference7 articles.
1. BROCKHOFF T. Grinding-Hardening: A Comprehensive View[J]. Annals of the CIRP, 1999, 48 (1): 255-260.
2. ZARUDI I, ZHANG L C. Mechanical Property Improvement of Quenchable Steel by Grinding[J]. Journal of Materials Science, 2002, 37(18): 3935-3943.
3. LIU Judong, WANG Guicheng, CHEN Kangmin, et al. Experimental studies of grind-hardening for AISI1045 steel[J]. MATERIALS SCIENCE & TECHNOLOGY, 2005, 13(03): 326-328.
4. PAN Zhongfeng, WANG Guicheng, ZhANG Jjinyu, et al. Thickness Prediction of Grind-hardening Layer[J]. Tool technology, 2009, 43(1): 20-24.
5. XU Xipeng, YU Yiqing, HUANG Hui, et al. Mechanism of abrasive wear in the grinding of titanium(TC4) and nickel(K417) alloys[J]. Wear, 2003, 255: 1421-1426.
Cited by
1 articles.
订阅此论文施引文献
订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献