Orthogonal Test Design and Numerical Simulation of 100QJ10 Type Deep-Well Pump

Abstract

In this paper in order to develop high efficiency and high head deep-well pump, a L9 (34) orthogonal experiment was performed with four factors and three values including outlet angle, outlet width, the outside diameter of impeller back shroud, etc. 9 impellers were designed. The whole flow field of new-type two-stage deep-well pump at the operating point for design was simulated by FLUENT 6.2 using the standard model, SIMPLEC algorithm, second-order upwind scheme to solve, and analyze the independent of the number of the grid. 9 groups of the efficiency and head in design scheme were obtained. The effects of geometrical parameters on efficiency, head were researched using Latin square test method. The primary and secondary factors of the design parameters were acquired by way of variance analysis. According to the test result, an optimum program to further design was put forward. After manufactured and tested, the efficiency and head of the final optimal design models were significantly improved. The productions show good energy saving and material saving characters and could replace traditional pumps for deep well in the future, the comprehensive technical indicators achieve international advanced levels. The results would be instructive to the design method of new-type deep well pump.