Affiliation:
1. Hong Kong University of Science and Technology
Abstract
In order to enhance the cooling performance, better understanding of the effects of coolant parameters is necessary. In this project, a total of five input parameters for actively cooled and activated cutting fluid were studied. An aerosol spectrometer was used to measure the particle size spatial distribution of the cooling mist in the fluid. Taguchi method was used in the design of experiments. It was found that the unit volume net specific particle counts exhibit the behavior of oscillation and attenuation of a second order dynamic system. Cooling mist particle spatial frequency ranges from 0.01269/μm to 2.5/μm, the weighted average size ranges from 0.3051μm to 3.714μm and the particle size difference for 99.8% count attenuation ranges from 0.5μm to 19.7μm. The order of importance of the input parameters was studied and the coolant concentration was found as the most important input parameter for the unit volume net particle counts.
Publisher
Trans Tech Publications, Ltd.
Subject
Mechanical Engineering,Mechanics of Materials,General Materials Science
Reference13 articles.
1. K. Suzuki, H.B. Qun, Y. Shishido, T. Uematsu, M. Iwai and S. Shimizu: Proposal of megasonic vibration induced coolant and its application to machining, Proc ISAAT 1999 (1999), p.513.
2. K. Suzuki, H.B. Qun, T. Uematsu, M. Iwai and T. Kami: Effect of megasonic coolant applied to LCD/PD glass edge grinding, Proc ISAAT 2000 (2000), p.285.
3. K. Suzuki, H.B. Qun, S. Mishiro, K. Tanaka, T. Imai, A. Sharma, T. Uematsu and M. Iwai: Key Engineering Materials Vol. 238-239 (2003), p.183.
4. K. Suzuki, Y. Tanaka, M. Iwai, T. Uematsu and K. Tanaka: Key Engineering Materials Vol. 257-258 (2004), p.311.
5. Y. Gao, S. Tse and H. Mak: Applied Thermal Engineering Vol. 23 (2003), p.523.
Cited by
4 articles.
订阅此论文施引文献
订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献