Affiliation:
1. Shandong Polytechnic University
Abstract
PAE as the wet strength agent has a long history; it not only has the wet strength performance and the retention and drainage characteristics. This paper focuses on the technological conditions of preparation of PAE wet-strength agent and the application conditions. The results showed that the well PPC was obtained under the following conditions: the mole ratio of adipic acid and diethylenetriamine were 1:1.05, the amount of catalyst (mole ratio of the total raw materials) was 1%, the temperature of heat preservation was 165°C and the reaction time was 4h. The optimum condition of preparing PAE was obtained as followings: the ratio of EPI to PPC of 1.2:1, the epoxidation temperature of 60°C and reaction time of 2h. While applied in softwood pulp, when the dosage of PAE was 1%, the wet strength agent provided the satisfactory effect.
Publisher
Trans Tech Publications, Ltd.
Reference5 articles.
1. Obokata, T.; Isogai, A. J Polym Environ 2005, 13, 1.
2. Takao Obokata, Masahiro Yanagisawa, Akira Isogai. Characterization of Polyamideamine-Epichlorohydrin (PAE) Resin: Roles of Azetidinium Groups and Molecular Mass of PAE in Wet Strength Development of Paper Prepared with PAE.J. 2005. 5. 8.
3. Lijuan Liu, Guang-hua Zhang: Paper Science & Technology 2011 Vol. 3 (2011), p.45. No. 5. In Chinese.
4. Kokko B J, Post E W. Wet strength thermosetting resin formulations and polyaminamide polymers suitable for use in the manufacture of paper products: US, 6222006[P]. 2001, 04, 24.
5. Gorzynski M，Duren D E: Pingel A D. Epihalohydrin based resins having reduced halogen content [P]. U.S. US5516885. 1996, 5, 14.
Cited by
4 articles.
订阅此论文施引文献
订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献