Abstract
In this paper the tensile and fatigue life tests of carbon fiber-reinforced epoxy prepreg
(CFRP) were conducted in order to investigate the influence of volume ratio and fiber orientation.
CFRP/Al7075 laminate hybrid composite (CARALL) consists of alternating Al7075-T6 sheets and
carbon epoxy prepreg (epoxy 121oC #2560). The fiber orientations of CFRP were applied to the
extent of 0/90° and ±45°. The CFRP layers are 1ply, 3plies and 5plies in case of 0/90°, and 1ply and
2plies in case of ±45° of carbon fiber direction, respectively. The tensile strength decreased with the
volume ratio of CFRP in both the cases of fiber orientation 0/90° and ±45°. The fatigue life is lower
in large volume ratio of CFRP than in small volume ratio in both the cases of fiber orientation 0/90°
and ±45°.
Publisher
Trans Tech Publications, Ltd.
Subject
Mechanical Engineering,Mechanics of Materials,General Materials Science
Reference6 articles.
1. K. Y. Rhee, J. H. Yang, C. S. Yoon, N. S. Choi: A Study on the CFRP Treatment by Ion Assisted Reaction Method to Improve T-peel Strength of CFRP/Aluminum Composites. Journal A of KSME. (2002), pp.570-575.
2. S.W. Oh, H.K. Yoon, W.J. Park, K.B. Lee and C.W. Hur. The effect of bridging on fatigue crack growth behavior in Aramid Patched Aluminum alloy (APAL). Journal of KSME. Vol. 8. No. 4, (1994), pp.375-384.
3. Osamu Haga and Minoru Kimura. Tensile properties of Al/CFRP multi layered hybrid composite materials. J. of materials. Japan. Vol. 35. No. 399, (1986), pp.1411-1417.
4. R. Marissen. Flight simulation behavior of aramid reinforced aluminum laminates(ARALL). Engineering Fracture Mechanics. Vol. 19. No. 2. (1984), pp.261-277.
5. L. B. Vogelesang. Designing a new hybrid materials by combining high strength aluminum alloys and aramid fibers (preliminary results). Delft University Report B2-80-6. (1980).
Cited by
2 articles.
订阅此论文施引文献
订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献