Affiliation:
1. Kyushu University
2. Nanjing University of Aeronautics and Astronautics
Abstract
A kind of new monolayer brazed diamond wire saw with both chemical bonding at the interface between diamond grits and brazing alloy and optimum grits distribution was made. And a machining performance comparative experiment was carried out between the sintered diamond saw from Italy and the brazed one mentioned above. The sawn material is marble with middle hardness. The testing results show that the wire saw with a brazed bonding diamond grid can achieve two to three times the working efficiency of conventional sintered diamond saw, and the corresponding service life can do 3~4 times. Furthermore, the grits of the brazed diamond wire fail mainly in micro fracture modes other than pull-out ones of the sintered diamond saw grits, indicating the strong retention of brazing alloy to the diamond grits. Almost no grits pulling out for brazed diamond wire saw is the key factor of its longer service life, and the optimum distribution and micro fracture of the brazed diamond wire grits raise the machining efficiency.
Publisher
Trans Tech Publications, Ltd.
Subject
Mechanical Engineering,Mechanics of Materials,General Materials Science
Reference6 articles.
1. B. Xiao, H.J. Xu, Z.B. Wu and X.P. Xu: Hanjie Xuebao, Vol. 22 (2001) No. 2, p.23 (Chinese).
2. B. Xiao, H.J. Xu and Y.C. Fu: Key Engineering Materials, Vols. 259-260 (2004), p.151.
3. Y.C. Fu, et al: J. Mater. Proces. Tech. Vol. 129 (2002), p.118.
4. B. Xiao: Journal of Mechanical Engineering, Vols. 38 (2002) No. 13, p.91 (Chinese).
5. Y.C. Fu, et al: Tool Engineering, Vol. 32 (1998) No. 8, p.4 (Chinese).
Cited by
5 articles.
订阅此论文施引文献
订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献