Formability of Friction Stir Welded and Arc Welded 5083 Aluminum Alloy Sheets-Reference-Cited by-同舟云学术

Formability of Friction Stir Welded and Arc Welded 5083 Aluminum Alloy Sheets

Published:2007-06 Issue: Volume:340-341 Page:1473-1478
ISSN:1662-9795
Container-title:Key Engineering Materials
language:
Short-container-title:KEM

Author:

Hirata Tomotake¹,Oguri T.¹,Hagino H.¹,Tanaka Tsutomu¹,Wook Chung Sung²,Tsujikawa Masato³,Takigawa Yorinobu³,Higashi Kenji³

Affiliation:

1. Technology Research Institute of Osaka Prefecture

2. Osaka Industrial Promotion Organization

3. Osaka Prefecture University

Abstract

The formability in friction stir and arc welded 5083 Al alloys was investigated. The elongation in friction stir welded material under uniaxial tensile test increased with the decrease in friction heat flow during friction stir welding (FSW) and the value of dome height under biaxial bulge test increased with friction heat flow. The ductility improved according to changes in FSW condition and FS-welded alloy sheet exhibited excellent formability.

Publisher

Trans Tech Publications, Ltd.

Subject

Mechanical Engineering,Mechanics of Materials,General Materials Science

Link

https://www.scientific.net/KEM.340-341.1473.pdf

Reference11 articles.

1. C. J. Dawes and W. H. Thomas, Weld. J. Vol. 75 (1996) p.41.

2. Y. S. Sato, M. Urata, H. Kokawa and K. Ikeda, Mat. Sci. Eng. Vol. A354 (2003) p.298.

3. M. Mochizuki, M. Toyoda, M. Inuzuka and H. Nishida, ASME PVP (Am Soc Mech Eng Press Vessels Pip Div) Vol. 474 (2004) p.17.

4. M. Nakai and N. Eguchi, Kobe Steel Eng. Report (Japanese) Vol. 54 (2004) p.62.

5. Y. S. Sato, S. H. C. Park, H. Kokawa, Matel. Mater. Trans. Vol. 32A (2001) p.3033.

Cited by 12 articles. 订阅此论文施引文献订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献

1. Improvement in limiting drawing ratio of aluminum tailored friction stir welded blanks using modified conical tractrix die;Journal of Manufacturing Processes;2017-08

2. Joint Properties of Three Dimensional FSW;Journal of the Japan Society for Technology of Plasticity;2016

3. Forming limit investigation of friction stir welded sheets: influence of shoulder diameter and plunge depth;The International Journal of Advanced Manufacturing Technology;2013-08-17

4. Formability of similar and dissimilar friction stir welded AA 5182-H111 and AA 6016-T4 tailored blanks;Materials & Design;2009-09

5. Mechanical behaviour of similar and dissimilar AA5182-H111 and AA6016-T4 thin friction stir welds;Materials & Design;2009-01