Affiliation:
1. Silesian University of Technology
Abstract
This work presents the investigation results of laser remelting and alloying especially the laser parameters and its influence on the structure and properties of the surface of the 32CrMoV12-28 hot work steel, using the high power diode laser (HPDL). As a result structure changes in form of fragmentation were determined. The reason of this work was to determine the optimal laser treatment parameters, particularly the laser power to achieve good layer hardness for protection of this hot work tool steel from losing their work stability and to make the tool surface more resistant to action in hard conditions. For alloying the tantalum carbide, tungsten carbide and vanadium carbide powders were used. For investigations hardness measurements of the different remelting areas were performed. The remelted layers which were formed in the surface of investigated hot work steel were examined metallographically and analyzed using light and electron microscope. Three phases of carbides, TaC, VC and WC, were observed.
Publisher
Trans Tech Publications, Ltd.
Subject
Mechanical Engineering,Mechanics of Materials,General Materials Science
Reference9 articles.
1. Dobrzański L.A.: Podstawy nauki o materiałach i metaloznawstwo Materiały inŜynierskie z podstawami projektowania materiałowego. WNT, Warszawa - (2002).
2. Dobrzański L.A., Mazurkiewicz J., Hajduczek E.: Journal of Mat. Proc. Tech. 157-158, 472-484 - (2004).
3. Klimpel A.: Lasery diodowe duŜej mocy w spawalnictwie. Przegląd spawalnictwa nr 8, Warszawa - (1999).
4. Dae-Hwan K., Seong-Hyeon H., Byoung-Kee K.: Fabrication of ultrafine TaC powders by mechano-chemical process, Materials Letters - (2004).
5. Klimpel A.: Napawanie i natryskiwanie cieplne, WNT Warszawa - (1999).
Cited by
7 articles.
订阅此论文施引文献
订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献