Affiliation:
1. Guangdong University of Technology
Abstract
Supported holes of Printed circuit board (PCB) are drilled with two different drill bits. Drilling force (thrust force and torque) and chip morphology are examined at different cutting parameters, and the effects of the two drills are discussed. The results indicate that the drilling force and chip morphology are affected by the feed rate, spindle speed and drill shape. Thrust force increases with the increasing feed rate, and decreases with the increasing spindle speed. Optimization of drill geometry can reduce the thrust force significantly, and is effective in chip breaking which can improve the chip evacuation during the drilling process.
Publisher
Trans Tech Publications, Ltd.
Reference6 articles.
1. Chengyong Wang, Lixin Huang, Lijuan Zheng, Ming Chen. Review of High Speed Micro drilling PCB & Key Technology. Tool Engineering, Vol. 44, No. l (2010): 3-10 (In Chinese).
2. Information on http: /wenku. baidu. com/view/c76f3fd276a20029bd642deb. html.
3. Hinds B K, Reanor M. Drilling of Printed Circuit Boards: Factors Limiting the Use of Smaller Drill Sizes. Proceedings of the Institution of Mechanical Engineers. Part B - Engineering Manufacture, 2000, 214(1): 35-45.
4. Ogawa K, Aoyama E. Inoue H. Investigation On cutting mechanism in small diameter drilling for GFRP (thrust force and surface roughness at drilled hole wal1). Composite Structure, 1997, 38(1-4): 343-350.
5. Aoyama E., Nobe H, Hirogaki T. Drilled hole damage of small diameter drilling in printer wiring board. Journal of Materials Processing Technology, 2001, 118(1-3): 436-441.
Cited by
13 articles.
订阅此论文施引文献
订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献