Influence of Heat Treatment on Structure and Properties of the Cast Magnesium Alloys-Reference-Cited by-同舟云学术

Influence of Heat Treatment on Structure and Properties of the Cast Magnesium Alloys

Published:2006-02 Issue: Volume:15-17 Page:491-496
ISSN:1662-8985
Container-title:Advanced Materials Research
language:
Short-container-title:AMR

Author:

Tański Tomasz¹,Dobrzański Leszek Adam¹,Čížek Lubomír²

Affiliation:

1. Silesian University of Technology

2. VŠB - Technical University Ostrava

Abstract

In this paper is presented the structure and proprieties of the cast magnesium alloys as cast state and after heat treatment cooled with different cooling rate, depending on the cooling medium (furnace, water, air). For investigations samples in shape of 250x150x25 mm plates were used. The presented results concern X-ray qualitative and quantitative microanalysis as well as qualitative and quantitative X-ray diffraction method, tensile tests, hardness measurement. In the analysed alloys a structure of α %solid solution and fragile phase β (Mg17Al12) occurred mainly on grain borders as well as eutectic and phase AlMnFe, Mg2Si. Investigation are carried out for the reason of chemical composition influence and precipitation processes influence to the structure and mechanical properties of the magnesium cast alloys with different chemical composition in as cast alloys and after heat treatment.

Publisher

Trans Tech Publications, Ltd.

Subject

General Engineering

Link

https://www.scientific.net/AMR.15-17.491.pdf

Reference11 articles.

1. Magnesium Alloys and their Application, ed. Kainer, K.U., Sb. Int. Congress Magnesium Alloys and their Application, Mnichov, 2000, pp.3-8, 534-608.

2. J.F. Grandfield, J.A. Taylor : Tensile cohereny in semi-solid AZ91, Held during the TMS Annual Meting in Seattle, Washington, USA, (2002).

3. ASM specialty Handbook- Magnesium and Magnesium Alloys, ed. Avedesian, M.M., Baker, H., ASM International, USA, 1999, pp.3-84.

4. J.M. Tartaglia, J.C. Grebetz: Observations of Intermetallic Particle and Inclusion Distributions in Magnesium Alloys., The Minerals, Metals&Materials Society, (2000).

5. Mordike B.L., Ebert T.: Magnesium. Properties-applications-potential, Materials Science and Enrineering nr A302, Journal of Materials Processing Technology, 117 (2001), pp.37-45.

Cited by 32 articles. 订阅此论文施引文献订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献

1. Advances and prospects of high-purity magnesium and its alloys in medicine – A concise review;Journal of Alloys and Compounds Communications;2024-09

2. Microstructural homogeneity, texture and corrosion properties of RE-doped 55Mg-35Pb-9.2Al-0.8B alloy fabricated via equal channel angular pressing (ECAP);Journal of Alloys and Compounds;2023-12

3. Effect of homogenization heat treatment on the microstructure of AZ91 magnesium alloy at different temperatures and ageing times;Journal of Engineering Research;2023-09

4. The influence of heat treatment on discharge and electrochemical properties of Mg-Gd-Zn magnesium anode with long period stacking ordered structure for Mg-air battery;Electrochimica Acta;2021-01

5. Microstructure evolution and quench sensitivity characterizations of Mg-9.5Gd-0.9Zn-0.5Zr alloy;Vacuum;2020-11