Affiliation:
1. Angang Steel Company Limited
2. University of Science and Technology Beijing
Abstract
Comparison of grain growth of fine-grained and coarse-grained austenite in a Nb-V-Ti microalloyed steel during reheating or equalization at the same temperature was investigated using cold-charging and hot-charging specimens respectively in this study. The results show that the different grain growth behavior appears in fine-grained and coarse-grained austenite. The uniform grain growth and lower growth rate at reheating temperature studied was found in fine-grained austenite, while partial grain growth and higher growth rate was present in coarse-grained austenite. During reheating or equalization, the slow growth rate in fine-grained austenite may be contributed to stronger pinning force of fine precipitates while higher grain growth rate in coarse-grained austenite were believed to the result of lager size difference among part of grains. Grain coarsening occurs in fine-grained austenite as result of precipitate unpinning at extending holding time, but coarse-grained austenite remained wide size distribution at the same condition and this should not be considered as grain coarsening. coarse-grained austenite remained wide size distribution at the
Publisher
Trans Tech Publications, Ltd.
Subject
Mechanical Engineering,Mechanics of Materials,Condensed Matter Physics,General Materials Science
Reference19 articles.
1. Zhang Hongtao, Pang Ganyun. et al . Mater. Sci. Forum, Vol. 500~501(2005), p.295.
2. Y. Li, J. A. Wilson, D. N. Crowther. et al . ISIJ Int. Vol. 44(2004), p.1093.
3. Y. Li, D.N. Crowther, P.S. Mitchell and T.N. Baker. ISIJ Int. Vol. 42(2002), p.636.
4. Ruizhen Wang C.I. Garcia, M. Hua . et al . Mater. Sci. Forum, Vol. 500~501(2005), p.229.
5. A.J. Fernandez, B. Lopez, J.M. Rodriguez-Ibabe. Metall. Mater. Trans. A, Vol. 33(2002), p.3089.
Cited by
4 articles.
订阅此论文施引文献
订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献