Development of TiB<sub>2</sub>-Based Cermets with Fe-Mo Binder-Reference-Cited by-同舟云学术

Development of TiB₂-Based Cermets with Fe-Mo Binder

Published:2012-11 Issue: Volume:527 Page:9-13
ISSN:1662-9795
Container-title:Key Engineering Materials
language:
Short-container-title:KEM

Author:

Panasuk A.¹,Umanskyi A.¹,Storozhenko M.¹,Akopyan V.¹

Affiliation:

1. Institute for Problems of Materials Science

Abstract

In this study, the wettability and interaction of TiB2with melted iron and iron-molybdenum alloys have been investigated. The wetting contact angles were determined, the structure and phase composition of the drops have been investigated by the methods of energy dispersive X-ray microanalysis. The results showed that TiB2–(Fe-13%Mo) system prove to be an optimum one for the new cermets production because of good wetting and minimal interaction between components. The TiB2-(Fe-13wt.%Mo) cermets were produced by sintering in vacuum. The influence of initial TiB2particles size on the structure formation of the cermets above has been established.

Publisher

Trans Tech Publications, Ltd.

Subject

Mechanical Engineering,Mechanics of Materials,General Materials Science

Link

https://www.scientific.net/KEM.527.9.pdf

Reference4 articles.

1. M. Rosso, Ceramic and metal matrix composites: Routes and properties, J. of Materials Processing Technology, 175(2006) 364-375.

2. V. Matkovich, Boron and refractory borides, Springer-Verlag, New-Yourk, (1977).

3. G. Ronalds, Materials properties of titanium diboride, J. Res. Nat. Inst. Stand. Technol. 105 (2000) 709-720.

4. A. Panasyuk, A. Umansky, Physicochemical principles of formation of composite materials based on titanium diboride, J. of the Less-Comm. Met. 117(1986) 335 – 339.

Cited by 19 articles. 订阅此论文施引文献订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献

1. The Surfaces Properties of Steel Parts with Wear-Resistant Coatings of the 1М and 90% ВК6 + 10% 1M Composition Applied by the Method of Electrospark Alloying with the Use of Special Technological Environments. Pt. 2. Wear Resistance, Topographic and Mechanical Properties;METALLOFIZIKA I NOVEISHIE TEKHNOLOGII;2024-02-01

2. Improving a Process for Completing a Positive Connection of Hub-Shaft Type Using Combine Methods;Lecture Notes in Mechanical Engineering;2024

3. The Surfaces Properties of Steel Parts with Wear-Resistant Coatings of the 1M and 90% BK6 + 10% 1M Composition Applied by the Method of Electrospark Alloying with the Use of Special Technological Environments. Pt. 1. The Strengthened-Surfaces’ Structural State Features;METALLOFIZIKA I NOVEISHIE TEKHNOLOGII;2023-12-25

4. Properties of Surfaces Parts From X10CrNiTi18-10 Steel Operating in Conditions of Radiation Exposure Retailored by Electrospark Alloying. Pt. 1. Features of Topography and Mechanical Properties of Coatings;METALLOFIZIKA I NOVEISHIE TEKHNOLOGII;2022-11-14

5. Self-Propagating High-Temperature Synthesis in the Ti–B–Fe System with AlN Additions;Inorganic Materials;2022-09