Abstract
LED healthy light source by using a blue LED chip to excite phosphor was prepared successfully. Four kinds of LED commercial phosphors (cyan phosphor with a peak wavelength of 498 nm, green phosphor with 520 nm, yellow-green phosphor with 546 nm, and red phosphor with 628 nm) were selected that could be excited by blue light. A series of experimental studies were carried out on the different amounts of glue, different powder-glue ratio, different combinations of phosphors, and the influence of different driving currents. Trough the optimization of the experimental scheme, we obtained a LED healthy light source spectrum with luminous efficiency higher than 124 lm/w, color rendering index higher than 80, color temperature around 4000 k. These spectra are in good agreement with the full spectrum of sunlight, and the spectral continuity and uniformity are better, which accord with the requirements of bright (dark) vision, and the proportion of the blue spectrum is less than 2.4%, which meets the high quality and healthy lighting requirements of safety and comfort.
Publisher
Trans Tech Publications, Ltd.
Subject
Mechanical Engineering,Mechanics of Materials,Condensed Matter Physics,General Materials Science
Reference24 articles.
1. Y. Wang, Development Schedule and Criterion of Talent Training System for Semiconductor Lighting Industry Guangzhou: SUN YAT-SEN UNIVERSITY PRESS. (2017) 1-17.
2. C.B. Huang, Y. Wang, B. Peng, Study of Fabrication and Application of the Non Visual Hazard LED Materials Report, Nano and new materials album (2) 311-315.
3. D. Roberts, Artificial lighting and the blue light hazard (The facts about lighting and vision) MD Support, (2011) 1-38.
4. H. Kim, H. Kim, C.H. Jung, I. Yoon, A Method for Reducing Blue Light Hazard from White Light-Emitting Diodes Using Colorimetric Characterization of the Display, International Journal of Control and Automation. 8 (2015) 9-18.
5. W. He, C.Y. Yang, Spectral Contrast and Comprehensive Effect Analysis of Fluorescent and LED in University Classrooms Light & Lighting. 042 (2018) 51-55.