Effect of Nb on the Austenite Microstructural Homogeneity of Hot Rolled Rebars

Abstract

While the role of Nb in flat rolling of low carbon steels has been investigated in many works, the information about the use of Nb in rebar rolling of higher carbon grades is more limited. Rebar rolling presents differences relative to flat rolling that can affect the role of Nb, such as the application of higher number of rolling passes, higher strain rates, lower interpass times, and, consequently, enhanced adiabatic heating. Increasing the number of passes can contribute to austenite grain refinement. However, the high finishing temperatures in rebar rolling can lead also to significant austenite grain growth and microstructural heterogeneity development before phase transformation. This phenomenon will directly influence the final grain size and can also lead to the appearance of second hard phases in the final product. One of the options to avoid austenite grain growth is to add microalloying elements that retard grain growth kinetics, either in solid solution or as precipitates. This can open new roles for the application of Nb in rebar rolling. To analyze this, in this work laboratory torsion tests were performed with two 0.2%C steels microalloyed with two different Nb contents (0.029% and 0.015%). Soaking temperatures from 1100°C to 1250°C were applied to obtain different amounts of Nb in solid solution before grain growth study. The study shows that not only finish rolling temperature and cooling time, but also reheating temperature and the amount of Nb remaining in the form of undissolved precipitates are important factors controlling austenite grain growth.