Affiliation:
1. JSC «D.V. Efremov Institute of Electrophysical Apparatus»
2. Saint Petersburg National Research University of Information Technologies
Abstract
In this work, a study of the cases of destruction of the CuCrZr / 316L (N) bimetallic joint (BMJ) obtained by diffusion welding under conditions of hot isostatic pressing (HIP) was carried out. The identified defects are cracks propagating in the BMJ zone in the corner zone of the mock-ups of the heat-sink elements (HE). The analysis of the causes of destruction of the BMJ was carried out and the factors leading to the weakening of the BMJ zone are analyzed. The analysis of the thermal and stress-strain state of the HE mock-up during the manufacturing process was carried out. The study of the elements of the HE mock-up were carried out by methods of non-destructive testing (ultrasonic testing (UT)) and destructive testing (metallography; fractography; energy-dispersive X-ray spectroscopy; tensile tests). The inclusion of brittle phases in the zone of the BMJ was revealed and an assumption was made about the chemical composition of these phases. It was revealed that this line of brittle phases is a crack propagation zone in all cases of destruction of the BMJ in the HE mock-ups. The temperature range is revealed at which the effect of "ductility failure" of the CuCrZr is observed during the tensile testing of the samples.
Publisher
Trans Tech Publications, Ltd.
Subject
Mechanical Engineering,Mechanics of Materials,Condensed Matter Physics,General Materials Science
Reference8 articles.
1. A.A. Gervash, D.A. Glazunov, D.V. Lyanzberg, I.V. Mazul, A.Y. Ogursky, P.Y. Piskarev, V.V. Ruzanov, Refinement of the technology of hot isostatic pressing of vacuum-tight bimetallic joint of ITER in-Vessel components, Innovative Designs and Technologies of Nuclear Power: Collection of papers of V International Scientific and Technical Conference, Publishing House of JSC NIKIET,, Moscow, 2018, pp.2428-2434.
2. P.Y. Piskarev, A.Y. Ogursky, A.A. Gervash, I.V. Mazul, Preparation to program carrying out of technology qualification of beryllium encasement vacuum induction soldering for components of ITER reactor, Science Intensive Technologies in Mechanical Engineering 8 (2018) 33-41.
3. A. Gervash, R. Giniyatulin, T. Guryeva, D. Glazunov, V. Kuznetsov, I. Mazul, A. Ogursky, P. Piskarev, V. Safronov, R. Eaton, R. Raffray, O. Sevryukov, The development of technology of Be/CuCrZr joining using induction brazing, Fusion Engineering and Design 146 (2019) 2292-2296.
4. S.H. Goods, J.D. Puskar, Solid state bonding of CuCrZr to 316L stainless steel for ITER applications, Fusion Engineering and Design 86 (2011) 1634-1638.
5. N. Ordas, F. Samaniego, I. Iturriza, A. Gomez, C. Escudero, A.I. Fernandez-Calvo, I. Cobo, S. Banetta, S. Heikkinen, T. Cicero, Mechanical and microstructural characterization of HIP joints of a simplified prototype of the ITER NHF First Wall Panel, Fusion Engineering and Design 124 (2017) 999-1003.
Cited by
6 articles.
订阅此论文施引文献
订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献