Affiliation:
1. Universidad Continental
Abstract
In order to improve the sustainable construction in Peru, throughout the recycling of non-biodegradable materials, a study of the influence of glass and Polyethylene terephthalate (PET) wastes in the physic properties of concrete bricks was carried out. They were made with a 1:5:2 cement, fine aggregate, and waste relation. Three proportions were studied named P-01, P-02, and P-03. Each proportion had a different content of glass and PET wastes, as a result, it was found that the average brick’s absorption was increased with PET wastes and it was reduced with glass wastes. On the other hand, the compressive strength value increased with glass wastes and it was reduced with PET wastes. Finally, it was found that P-02 was the most efficient concrete brick proportion to develop a sustainable construction, obeying the requirements of the Peruvian national building regulations.
Publisher
Trans Tech Publications, Ltd.
Subject
Mechanical Engineering,Mechanics of Materials,Condensed Matter Physics,General Materials Science
Reference10 articles.
1. S. Chan, Comprehension Of Green Buildings For General Population In Taiwan,, Bulletin of JSSD, The Science Of Design, vol. 60, no 5, pp.31-38, (2014).
2. Ministerio del Ambiente (Perú), National System Of Environmental Information,, Retrieved from: https://sinia.minam.gob.pe/informacion/estadisticas.
3. O. Olofinnade et al, Sustainable utilization of crushed waste glass as sand replacement for production of eco-friendly interlocking paving stones,, IOP Conf. Series: Materials Science and Engineering 652, (2019).
4. X. Wang, C. S. Chin and J. Xia, Impact of the Content Variation of the Different Recycled Wastes to the Properties of Concrete Paving Block,, MATEC Web Of Conferences 206, ICCEMS (2018).
5. O. Olofinnade et al, Reuse of pulverized fired clay brick waste as cement substitute in mortar for sustainable construction,, IOP Conf. Series: Materials Science and Engineering 652, (2019).