Micro-Ribbons and Micro-Wires Silica Synthesis Using Bottom-Top Technique

Abstract

Silica is one of the most important materials used in many industries. The basic factor on which the selection process depends is the structural form, which is dependent on the various physical and chemical properties. One of the common methods in preparing pure silica is that it needs more than one stage to ensure the preparation process completion. The goal of this research is studying the nucleation technique (Bottom-top) for micro-wires and micro-ribbons silica synthesis. The silica nanoand microstructures are prepared using a duality (one step); a combination of alkali chemical etching process {potassium hydroxide (3 wt %) and n-propanol (30 Vol %)} and the ultra-sonication technique. In addition, the used materials in the preparation process are environmentally friendly materials that produce no harmful residues. The powder product is characterized using XRD, FTIR, Raman spectrum and SEM for determining the shape of architectures. The most significant factor of the nucleation mechanism is the sonication time of silica powder production during the dual technique. The product stages are as follows; silica nanoparticles (21-38 nm), nanoclusters silica (46 – 67 nm), micro-wires silica (1.17 – 6.29 μm), and micro-ribbons silica (19.4 – 54.1 μm). It's allowing for use in environmental applications (multiple wastewater purification, multiple uses in air filters, as well as many industrial applications).