Affiliation:
1. National Institute of Advanced Industrial Science and Technology (AIST)
2. National Institute of Advanced Industrial Science and Technology
Abstract
AZCa912, 8.8mass%Al-0.68mass%Zn-0.25mass%Mn-1.9mass%Ca-Bal.Mg, continuous casting bars were formed and their hot compression properties were measured. AZCa912 alloy is a noncombustible magnesium alloy. AZCa912 bars 50 mm in diameter were formed by a direct chill continuous casting method. The surfaces of the bars had excellent metallic luster. Grain sizes in the bars were 148, and the dendrite arm spacing was 16.9 μm. Cracks on the side surfaces of the samples were formed by compression at 250-300°C, 0.01-1/s and 350°C, 1/s. However, inner cracks were not observed and-5 μm fine-grains were formed. Some samples had an unchanged casting structure after hot pressing, and the percent of the structure remaining unchanged decreased with low-temperature compression.
Publisher
Trans Tech Publications, Ltd.
Subject
Mechanical Engineering,Mechanics of Materials,Condensed Matter Physics,General Materials Science
Reference9 articles.
1. J. -M. Kim, B. -K. Park, J. -H. Jun K. -T. Kim and W. -J. Jung: Mater. Sci. Forum Vol. 510-511 (2006), pp.374-377.
2. D. H. Song, C. W. Lee, K. Y. Nm, S. W. Lee, Y. H. Park, K. M. Cho and I. M. Park: Mater. Sci. Forum Vol. 510-511 (2006), pp.250-253.
3. LF. Chiang, H. Hosokawa, JY. Wang, T. Uesugi, Y. Takigawa, K. Higashi K: Mater. Trans. Vol. 51 (2010), pp.1249-1254.
4. A. Watazu, M. Hakamada, H. Iwasaki, I. Shigematsu, N. Saito: Materials Science Forum 706-709 (2012) 1267-1272.
5. N. Omura, Y. Murakami, M. Li, T. Tamura, K. Miwa: 8th International Conference on Magnesium Alloys and their Applications, Weimar, Germany, (2009), p.58.
Cited by
1 articles.
订阅此论文施引文献
订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献