Affiliation:
1. University of Yamanashi
Abstract
Porous potassium niobate (KNbO3, KN) system ceramics were prepared by a conventional sintering method using carbon black (CB) nanoparticles. First, KN nanoparticles with a size of 100 nm was mixed with CB nanoparticles and binder using ball milling with ethanol. The mixture was dried, and pressed into pellets using uniaxial pressing. After binder burnout, these ceramics was sintered in air. Their piezoelectric properties were measured and discussed a relationship between porosity and piezoelectric properties. As the results, with increasing porosity, piezoelectric g33 constant increased significantly, which suggested that porous ceramics were effective for stress sensor application.
Publisher
Trans Tech Publications, Ltd.
Subject
Mechanical Engineering,Mechanics of Materials,General Materials Science
Reference11 articles.
1. APC international: Piezoelectric Ceramics: Principles and Applications, edited by APC international, APC international, Mackeyville (2002).
2. R.E. Newnham, D.P. Skinner and L.E. Cross: Mater. Res. Bull. Vol. 13 (1978), p.525.
3. D.P. Skinner, R.E. Newnham and L.E. Cross: Mater. Res. Bull. Vol. 13 (1978), p.599.
4. T.R. Shrout, W.A. Schulze and J.V. Biggers: Mater. Res. Bull. Vol. 14 (1979), p.1553.
5. K. Nagata, H. Igarashi and K. Okazaki: Jpn. J. Appl. Phys. Vol. 19 (1980), p. L39.
Cited by
13 articles.
订阅此论文施引文献
订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献