Affiliation:
1. Zhejiang University of Technology
Abstract
The surface of 304 austenitic stainless steel sheet specimen was processed by three different shot peening pressure. The thickness of grain refinement layer and refined degree were characterized by SEM, and surface hardness was tested by microhardness tester. The stress corrosion susceptibility of the specimens treated by 0.25,0.30 and 0.40 MPa shot peening pressure was compared through the slow strain rate tensile tests in 5% sodium chloride solution. The results showed that he grain refinement was caused by shot peening treatment in the surface layer and hardness increased; with the rise of shot peening pressure, the thickness of grain refinement layer increased, the surface hardness heightened and the stress corrosion susceptibility index decreased.
Publisher
Trans Tech Publications, Ltd.
Reference8 articles.
1. Omar Hatamleh. A comprehensive investigation on the effects of laser and shot peening on fatigue crack growth in friction stir welded AA 2195 joints[J]. International Journal of Fatigue, 2009, 31(5): 974-988.
2. Carvalho A L M, Voorwald H J C. Influence of shot peening and hard chromiun electroplating on the fatigue strength of 7050-T7451 aluminum[J]. International Journal of Fatigue, 2007, 29( 7): 1282-1291.
3. Azar V, Hashemi B, Mahboobeh Rezaee Yazdi. The effect of shot peening on fatigue and corrosion behavior of 316L stainless steel in Ringer's solution[J]. Surface and Coating Technology, 2010, 204(21): 3546-3551.
4. XU Binshi, LIU Shican. Surface Engineering[M]. Beijing: Mechanical Industry Press, 2000: 47.
5. MA Suyuan, CHEN Rui, HE Xiaochun, et al. Shot peening induced sthengthening of the surface layer of martensite stainless steel 0Cr13Ni4Mo[J]. Acta Metallurgica sinica, 2005, 41(1): 28-32.
Cited by
7 articles.
订阅此论文施引文献
订阅此论文施引文献，注册后可以免费订阅5篇论文的施引文献，订阅后可以查看论文全部施引文献