Abstract
The article is devoted to the regulation of the stress-strain state in the compressed elements of steel frames under full operating load. It is proposed to perform reinforcement of such elements with different end eccentricities of load application by rational regulation of the stress-strain state in the reinforcement elements. It is shown that the use of SDS adjustment for frame racks increases their bearing capacity and reduces deformability and welds. The new proposed technology of SDS regulation and possible constructive decisions are offered. Numerical experiment revealed high efficiency of application of the proposed solutions during the reconstruction and reinforcement of the metal frame system. The implementation of the proposed method of SDS regulation confirmed its effectiveness.
Publisher
Lviv Polytechnic National University
Reference16 articles.
1. Bilsky M.R., Kinash R.I. (2012). Calculation of force regulation in the process of reinforcement of compressed elements of steel frames. Theory and practice of construction. Bulletin of the National University "Lviv Polytechnic" № 737, 5-14 p. (in Ukrainian). http://ena.lp.edu.ua:8080/xmlui/bitstream/handle/ntb/16510/2-Bilsky-5-14.pdf
2. Crawford. J.E. (2014).Retrofit Methods to Mitigate Progressive Collapse. 55 p. https://www.engr.psu.edu.
3. Martin Vild, Miroslav Bajer. (2016).Strengthening of Steel Columns under Load: Torsional-Flexural Buckling. Advances in Building Technologies and Construction Materials 2016. Volume 2016. https://doi.org/10.1155/2016/2765821
4. Mohamed Ghannam, Nabil S.Mahmoud, Ahmed Badr, Fikry A.Salem. (2016).Effect of post tensioning on strengthening different types of steel frames. Journal of King Saud University - Engineering Sciences.Volume 29, Issue 4, October 2017, Pages 329-338 https://doi.org/10.1016/j.jksues.2016.07.001
5. Hohol M. V. (2018). Tension regulation in steel combined structures [monograph]. Kyiv: Stal, 222 p(in Ukrainian). https://bit.ly/3FBL97l