Author:
,Lozano Povis Arlitt Amy,Sanabria Perez Elías Adrián,
Abstract
In this paper, the estimation error of Dr. Pole's empirical equation was evaluated using copper pipes of different diameters (0.00953, 0.0127, 0.01588 m), under different flow pressure conditions (0, 300, 500, 1000, 1500, 2000, 2500, 3000 L/h). To carry out the experiments, the following instruments were used: an air compressor, 2 flow valves, a needle valve, a gas rotameter, copper piping, pressure gauges and transmitters, a Norus data logger with 4 to 20 mA output signals, thermocouples, and thermoresistors. They allow us to establish that the air pressure drops when the flowing through the pipes is higher (380 Pa) for small diameter pipes (0.00953 m), compared to larger diameters (0.01270 m and 0.01588 m) with a maximum of 54 and 28 Pa, respectively; and in relation to the flow rates, the pressure drop increases with a quadratic trend with respect to the flow rate. Finally, the residual errors that the empirical equation has in the pressure drop calculations, in general terms, are not of great magnitude.
Publisher
Lviv Polytechnic National University