Magnetic Field Homogeneity of Birdcage Coil for 4T MRI System with No Lumped Circuit Elements-Reference-Cited by-同舟云学术

Magnetic Field Homogeneity of Birdcage Coil for 4T MRI System with No Lumped Circuit Elements

Published:2014 Issue:4 Volume:E97.B Page:791-797
ISSN:0916-8516
Container-title:IEICE Transactions on Communications
language:en
Short-container-title:IEICE Trans. Commun.

Author:

SUGA Ryotaro¹,SAITO Kazuyuki²,TAKAHASHI Masaharu²,ITO Koichi²

Affiliation:

1. Graduate School of Engineering, Chiba University

2. Center for Frontier Medical Engineering, Chiba University

Publisher

Institute of Electronics, Information and Communications Engineers (IEICE)

Subject

Electrical and Electronic Engineering,Computer Networks and Communications,Software

Link

https://www.jstage.jst.go.jp/article/transcom/E97.B/4/E97.B_791/_pdf

Reference14 articles.

1. [1] J. Jin, Electromagnetic analysis and design in magnetic resonance imaging, CRC Press, Boca Raton, 1998.

2. [2] M. Fujita, M. Higuchi, H. Tsuboi, H. Tanaka, and T. Misaki, “Design of the RF antenna for MRI,” IEEE Trans. Magn., vol.26, no.2, pp.901-904, March 1990.

3. [3] T.S. Ibrahim and R. Lee, “Evaluation of MRI RF probes utilizing infrared sensors,” IEEE Trans. Biomed. Eng., vol.53, no.5, pp.963-967, May 2006.

4. [4] J. Chen, Z. Feng, and J.-M. Jin, “Numerical simulation of SAR and B1-field inhomogeneity of shielded RF coils loaded with the human head,” IEEE Trans. Biomed. Eng., vol.45, no.5, pp.650-659, May 1998.

5. [5] T. Kawamura, K. Saito, S. Kikuchi, M. Takahashi, and K. Ito, “Specific absorption rate measurement of birdcage coil for 3.0T magnetic resonance imaging system employing thermographic method,” IEEE Trans. Micro. Theory Tech., vol.57, no.10, pp.2508-2514, Oct. 2009.